There is no complete package: products
16-2034-03
EAN: 5903175315908
PROFI 24 V 1200 LED STRIP 2216 SMD 15 W 4000 K RA 90 IP65HS
| Stock status: |
to be confirmed by the account manager after ordering
|
| Degree of protection | IP65HS |
| Number of LEDs | 1200 LED |
| Type Diodes | SMD 2216 |
| Warranty | 3 years |
| Type of light source | One-color |
| Hue | Neutral |
| Color Temperature | 4000K |
| Voltage | 24V |
| Power | 15 W/m |
| CRI | 90 |
| Type of light intensity | Energy saving (12V) |
| PCB width | 10mm |
| Luminous efficacy | 91 lm/W |
| Luminous flux | 1369 lm/m |
| Cutting section | 25mm |
| Lifetime | 26200 |
| Roll length | 5m |
1200 LED 2216 SMD PCB 10 mm 3 oz Neutral white
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Type of light source
Hue
Color Temperature
Voltage
Power
CRI
PCB width
Cutting section
Lifetime
Roll length
Incorrect number of products in the package
Product sold only as a complete set
Unfortunately, the following products are missing: products
Similar products in Special offer
Product description
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
Neutral white
Neutral white is a universal color of light. The light of the LED strip is not tiring for the human eye, so it can be used in places where we spend a lot of time: in offices, in apartments.
24V voltage - lower voltage drops
Longer lighting installations do not have to involve voltage drops. The choice of 24V LED strips allows the use of longer sections of LED strip. This is due to lower current consumption compared to 12V installations. This also allows the use of smaller cable cross-sections needed for installation, which will make them easier to hide.
See colors in their natural shades
The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places.
IP65HS LED strip
IP65 Heat Shrink LED strips are a product with increased resistance to moisture and splashes. Thanks to the use of a special heat-shrinkable band, whose characteristics differ from the traditional silicone coating found in waterproof tapes, it is a modern solution that allows for better color uniformity than in the case of LED strips with classic IP65. This solution allows maintaining high lighting parameters wherever we need increased resistance to moisture and splashes.
Requires installation of a power supply
The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding a 10% margin to the calculated power of the power supply.
Why is it worth choosing the professional version of the LED strip?
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. When deciding to install a professional LED strip, we are almost 100% sure that each roll of the strip will have the same color and luminous flux.